To order this or any other Mathey Product, click here or call 800.725.7311.

Saddle Machine Contour Cutting Attachment with Template

The Contour Cutting Attachment with Template, in combination with the Saddle Machine, enables the welder, regardless of experience, to produce perfect miter and saddle cuts time after time. Simply change the template to alter the pipe end configurations. The Contour Cutting Attachment provides lateral movement of the torch as it follows the template, while the Saddle Machine rotates the torch around the pipe. Contour Cutting Attachments and templates are available for 1 1/2" – 48"
(38mm-1219mm) pipe.

All Templates are tested to provide proven results.
• Installation of the Contour Cutting Attachment and template to the Saddle Machine TAKES MINUTES.
• REDUCES LABOR required to obtain the desired cut.
• FAST ACCURATE shapes are obtained with oxy/fuel or plasma torches.

SHAPE TEMPLATES

Model	Part Number	Pipe Size Range (in / mm)	Estimated Shipping Weight (lbs / kg)
MSA	03.0115.M---	1.5 - 4 / 38 - 102	3.5 - 5 / 1.6 - 2.3
1SA	03.0115.1---	3 - 8 / 76 - 203	4.5 - 6 / 2 - 2.7
2SA	03.0115.2---	6 - 12 / 152 - 305	6 - 8 / 2.7 - 3.6
3SA	03.0115.3---	12 - 20 / 305 - 508	11 - 15 / 5 - 7
4SA	03.0115.4---	20 - 26 / 508 - 660	18 - 27 / 8 - 12
5SA	03.0115.5---	24 - 30 / 610 - 762	22 - 31 / 10 - 14
6SA	03.0115.6---	28 - 36 / 711 - 914	27 - 35 / 12 - 16
8SA	03.0115.8---	40 - 48 / 1016 - 1219	31 - 40 / 14 - 1

CONTOUR CUTTING ATTACHMENT

Model	Part Number	Pipe Size Range (in / mm)	Estimated Shipping Weight (lbs / kg)
MSA	03.0116.000	1.5 - 4 / 38 - 102	7 / 3
1SA	03.0116.002	3 - 8 / 76 - 203	8 / 4
2SA	03.0116.002	6 - 12 / 152 - 305	8 / 4
3SA	03.0116.003	12 - 20 / 305 - 508	9 / 4
4SA	03.0116.004	20 - 26 / 508 - 660	9 / 4
5SA	03.0116.005	24 - 30 / 610 - 762	11 / 5
6SA	03.0116.006	28 - 36 / 711 - 914	13 / 6
8SA	03.0116.008	40 - 48 / 1016 - 1219	16 / 7

SADDLE AND MITER CUTTING

1. Specify Mathey Dearman Machine Model (Example: 2SA).

2. Specify size/schedule (wall thickness) of pipe branch to be cut. (Example: 8" / 203mm pipe- Schedule 80.)

3. Specify size of main pipe to which the branch pipe will be fitted. (Example: 8" / 203mm pipe actual OD = 8 5/8" / 219mm.)

4. Specify the angle of the cut and whether it is a saddle or miter. (Example: 45 degree miter) (See figure 2.)

5. Specify whether the joint is “Saddle In” or “Saddle On” (See figure 1.)

6. Specify if pipe is to be offset. If the answer is yes, specify how much the pipe is to be offset.

* Please use this information as a convenient reference. You can fax the completed form to us at 918 447-0188. Please include your contact information so we can get in touch with you.