PIPEFITTING & FLANGE TOOLS

 

 

FLANGE LINE UP PINS

Flange Line Up Pins aid the welder in checking or obtaining critical alignment of flange to the pipe. The Mathey Dearman Aligning Pins are multi-purpose to rapidly align carbon steel and stainless steel. Additionally, the spring and end cap allow for expansion during welding.

   

INTERNAL FLANGE ALIGNMENT TOOL

The Internal Flange Alignment Tool quickly and accurately aligns the ID of the flange to the ID of the pipe. The ID of the flange can vary ±1/8" (3mm) to the ID of the pipe and still give perfect alignment.

             
 

FLANGE SPREADER

A pair of Flange Spreaders are used to gently separate flanges for the replacement of the flange gasket or to reapply sealant on the flange face.

   

WELDER'S GAUGE

The Q.C. Welder’s Gauge rapidly and accurately measures pipe “Hi-Lo” and plate mismatch before and after welding to minimize weld rejections.

The gauge is available in both English and Metric models.

             
 

PIT DEPTH GAUGE

The Pit Depth Gauge measures depth of pitting, weld undercut, pipe outside diameter “Hi-Lo”, weld height.
The stainless steel pit depth gauge mounts on the end of the Q.C. Welder’s Gauge housing and reads in both English and Metric dimensions. The Pit Depth Gauge is sold separately from the Quality Control (Q.C.) Welder’s Gauge.

   

PIPE FITTER'S SQUARE

The Stainless Steel Pipe Fitter's Square is a precision square that is designed specifically for the pipe fitter, boilermaker, welder or layout person.

             

 

 

PROTRACTORS

Mathey Dearman Protractors are used to determine or set bevels, transfer angles, and measure the squareness of one surface to another.

   

FRAMING SQUARES

The Small Stainless Steel and Large Aluminum Framing Squares are used to measure angles or squareness of one point to another, and to find pipe center line. When used with a level, the squares will measure drops in inches per foot to determine degrees of slope.

             

 

 

COUPON CUTTER

The Coupon Cutter makes the cutting of weld test coupons quick and easy. This efficient tool can be used for any procedure requiring removal of a section of the pipe wall on pipe sizes 4" (102mm) and larger.

   

SPACING WEDGES

The combination of Spacing Wedges and Mathey Dearman chain clamps or cage clamps enable better fit-up of pipe ends. The Wedges are used to give a precise weld gap. More...

             

 

 

PIPE WRAP

The Mathey Dearman Pipe Wrap has a double-ruled edge so it is never upside down or backwards. The Wrap can be used as a straight edge to make straight lines around the pipe and to mark angles to create pipe elbows.

     

 

             

 



Follow Me on Pinterest
Loading