Accu-Fit Clamps

Small Diameter Clamps
CE Approved

Accu-Fit Aligning Pipe

Accu-Fit with
Accu-Fit Stand
D240-ST

Orbital Welder on
Accu-Fit w/ Accu-Fit Stand
D240-ST

No Clamp makes a more clean and precise alignment of small diameter thin wall pipe and tubes than the Accu-Fit Clamp. Made of high-purity stainless steel, the Clamp aligns thin wall  pipes or tubes so that the welder can complete flawless welds.

The Jaws of the Clamp work independently of each other so pipes or tubes can be aligned concentrically to each other regardless of diameter. The Clamp offers sufficient clearance for most Orbital-Welding Heads. The Clamp will align pipe to Schedule 20 and is ideal for GTAW welding; also useful for GMAW and other types of welding.

                    •                    ACCURATELY ALIGNS pipes for orbital welding.

                    •                    CLEARANCE between jaws for most orbital welders.

                    •                    CONTAMINATION—High-purity stainless steel for the
                                        alignment of stainless steel and other specialty alloys.

The Accu-Fit Clamp is great for holding the inside diameters of stainless steel tubes in alignment for orbital welding in a chemical or food processing plant.

The Accu-Fit Clamp is great for holding the inside diameters of stainless steel tubes in alignment for orbital welding in a chemical or food processing plant.

Angler Clamp
CE Approved

Accu-Fit Variable
Angle Clamp

D240-RA

Angler has all of the sensational features of the Accu-Fit plus the ability to align small diameter thin wall pipe and tubes at angles up to 90 Degrees. Degree Indicator, located on the base of the clamp, is graduated in 5 Degree increments. The Angler aligns pipes, tubes and fittings 3/8" to 2 3/4" / 9 to 113mm in diameter with a wall thickness not to exceed Schedule 20.

The Accu-Fit Stand may be used to stabilize the clamp when the angle of clamping is set on Zero (0).

Accu-Fit and Accu-Fit Variable Specifications