Cage Clamps

The Hand Lever, Ratchet, and Hydraulic Cage Clamps have been the standard in the industry for more than 50 years. The Cage clamp rapidly aligns one pipe to another. Each Cage Clamp is manufactured for a specific pipe diameter. If the outside diameter of the pipe varies more that K 3/16 the clamp will not be accurately align the pipes. The three models of Clamps are available with two types of Alignment Bars. The No Tack arched alignment bar permits full circle welding of the pipe without removal of the clamp. The No Tack Type Clamp makes the welding process more efficient and insures a quality weld.

Stright Cross Bars on Tack Type Clamps have flared end so pipes can be moved into place more easily.  After tacking the clamp is moved off the joint and the full circle weld is completed.

No Tach Clamps, with arched Cross Bars, allow for a quality 100% weld without removal of the clamp. Arched Cross Bars on No Tack Clamps have flared end so pipes can be moved into place more easily.  Use the No Tack Clamp to more efficently align and weld pipe joint.

Straight Alignment Bars of the Tack Type clamp have flared end so pipes can moved easily into position and clamped. The pipe is tack welded between the alignment bars. Once the tack welding process is complete, the clamp is removed from the pipe and the weld is completed. The Hand Lever Cage Clamp is a great device for aligning smaller diameters of pipe. The cam tensioning mechanism of the clamp makes it easy to rapidly align small pipes. The Tack Type Hand Lever Cage Clamp is available for 2” - 60” (50-1524mm) pipe and the No Tack Hand Lever Cage Clamp is available for 3” - 60” (76-1524mm) pipe.

The Ratchet Cage Clamp provides the extra force necessary to align larger pipe diameters. The ratchet closure mechanism makes it easy and to align large pipes. The Tack Type Ratchet Handle Cage Clamp is available for 6”- 60” (152-1524mm) pipe and the No Tack Type Ratchet Handle Cage Clamp is available for 14”- 60” (356-1524mm) pipe. A standard 1” ratchet wrench fits all clamp sizes.

The Hydraulic Cage Clamp produces the extra strength necessary for aligning larger pipe diameters. The hydraulic closure mechanism of the clamp permits rapid and effortless closure and release of the clamp from the pipe. The Tack Type and No Tack Hydraulic Cage Clamps are available for 16” - 60” (406-1524mm) pipe.

Mathey Dearman Pipe Tongs securely grasp the pipe so it can be safely transported into the trench or about the pipe yard. The clamp automatically releases the pipe, when pressure is released from the lifting ring. The pads of the Pipe Tong are made of a rubber and cotton material to avoid contamination of stainless steel and other specialty alloys. Pipe Tongs are available for 2” to 36” (51mm – 914mm) steel, stainless steel and other specialty alloy pipes.